The decoration in winter is also smooth

2022-07-22
  • Detail

Winter decoration has many inconveniences. After all, even experts say: the winter climate is not suitable for decoration, but there is no absolute thing. As long as you identify the causes of adverse factors, you can easily carry out decoration in winter.

winter decoration has many inconveniences. After all, even experts say: the winter climate is not suitable for decoration, but there is no absolute thing, as long as you identify the causes of adverse factors, you can see the signs, The decoration can also be carried out smoothly in winter

Yangyi doors and windows Jiangke doors and windows

next, we invite experts to talk about the possible adverse factors and Countermeasures in winter construction

cracking and deformation of wood products

problem: the plates used in winter decoration are relatively dry, and they are very easy to crack after fabrication. In addition, wood products are prone to deformation due to excessive dehydration

solution: use light steel keel instead of wood keel for ceiling without modeling requirements to solve the deformation problem of wood keel

after the materials are transported to the construction site, they should be placed indoors for three to five days to adapt to the indoor humidity, but not next to the air outlet or heating

after the carpenter completes the production, the oil should be sealed as soon as possible to prevent the moisture from volatilizing

wall cracking

problem: after winter construction, wall cracking and bulging are easy to occur

solution: the designer suggests that the wall treatment should pay attention to the brushing method when decorating in winter. It is best to use roller brushing instead of spraying. The wall treatment usually requires painting interface agent, leveling, pasting cloth, primer, finish paint and other steps, and the next step can be carried out only after it is completely dry, otherwise the wall will crack and bulge in the future

it dries in winter, and the outer layer dries faster. If the putty is too thick, the inner layer is difficult to dry thoroughly, and the probability of hollowing, cracking and wall inequality will increase in the future

thermal expansion and cold contraction

problem: during decoration in winter, because the plate is in a shrinking state, if the installation is too dense, the plate will swell when the temperature rises in summer. If the joint is too small, it is easy to cause deformation

solution: in winter construction, we should also control the problem of joints. The door seam should not be too small to prevent the door from tightening in summer and cannot be opened and closed freely; When laying solid wood floors, about 2mm expansion joints should be left around, otherwise it will cause bulging and hanging; When making furniture on site, an interface seam of about 0.1mm should be left to avoid deformation; The joints of all woodwork shall be controlled at about 1mm, and the joints of gypsum board and cement board shall be controlled at about 8mm

if the new house does not have heating conditions, the owner can also discuss with the decoration company to divide the construction period into two parts. First carry out wall demolition and renovation, water and electricity renovation, carpentry and other projects that do not require high temperature, and then carry out other decoration projects after the temperature rises in the spring of the next year. Due to the long construction period arranged in this way, and the owner needs to pay the down payment before construction, it is best to choose a reputable brand decoration company to sign the contract, rather than small companies or guerrillas, so as to avoid disputes

link: give children a safe home decoration and don't leave four hidden dangers

石家庄男科医院

石家庄胎记医院

上海癫痫医院

Copyright © 2011 JIN SHI